worksbell

img

SSTS(86&BRZ)

Product Information

img

Click here to purchase

86&BRZ Genuine steering switch relocation stay part number: 542SSTS (Note 1)

27,280 JPY (24,800 JPY excluding tax)

It is a dedicated staket that can be relocated when replacing the switch on the stock steering wheel of the 86 and BRZ with an external steering such as MOMO or NARDI.
In order to accommodate most of the shapes of general φ35 or more three-spoke steering, it is possible to operate the switch part like a wing. (Note 2)

Note 1: The steering switch is not included in the product content. (Please remove it from the stock steering wheel and transfer it to the relevant product for use)
Note 2: In addition to the SRD kit, Standard Boss 542 or Short Boss 542S or 543S is required separately (sold separately). In addition, an extension harness is required when using the short boss.
Note 3: Steering wheels with a diameter of 33 or less may interfere with steering operation.

Applicable Models

Toyota 86 (ZN6), GR86 (ZN8)
Subaru BRZ (ZC6/ZD8)

Download the instruction manual

SSTS Kit (Steering Switch Relocation Stay)

img

Installation image: closed

img

Installation image: Open

img

Example of installation: RAPFIX GTC + Short BOSS

Extension Harness & ACC (Auto-Cruise) Kit Option for 542SSTS

4,180 yen(3,800 yen excluding tax)



Compatible models (Note 1), (Note 2)

542SSTS Extension Harness & ACC Mounting Kit T1 (Couplers 6P & 8P)
  Toyota 86 (ZN6), GR86 (ZN8)*3, Subaru BRZ (ZC6)

542SSTS Extension Harness & ACC Mounting Kit T2 (Coupler 8P & 10P)
  Subaru BRZ (ZD8)*Note 3

542SSTS Extension Harness & ACC Mounting Kit T3 (Coupler 8P & 10P)
  GR86 (ZN8) AT with EyeSight

542SSTS Extension Harness & ACC Mounting Kit T4 (Coupler 10P & 10P)
  GR86(ZN8)/BRZ(ZD8) MT & AT vehicles with EyeSight

Click here to purchase



Note 1: If you install the short boss with the genuine harness, the spiral cable will be pushed by the boss body, causing damage, so be sure to use an extension harness.
Note 2: The ACC switch cannot be relocated because the wiring is short with the genuine harness. Forcibly installing the switch may cause disconnection, so be sure to use an extension harness when relocating the ACC switch.
Note 3: This product is exclusive to MT vehicles without EyeSight.

T1

T1 Components

T2

T2 Components

T3

T3 Components

T4

T4 Components

img

Extension harness installation

 

Download the instruction manual

542SSTS Extension Harness & ACC Switch Mounting Kit (T1, T2, T3, T4)

TOYOTA GAZOO Racing GR86/BRZ Cup Certified Parts

The 86&BRZ Genuine Steering Switch Relocation Stay (542SSTS) and Extension Harness &ACC (Auto Cruise) Mounting Kit have been approved by TRA for use as certified parts for the TOYOTA GAZOO Racing GR86/BRZ Cup Professional Series and Clubman Series .

T.R.A. Approval Number: 240319-178

T.R.A. Grant Number:
T.R.A.240319-178(542SSTS)
T.R.A.240408-197(T1)
T.R.A.240408-198(T2)
T.R.A.240408-200(T4)

* For certified parts, please check the vehicle regulations and install them correctly according to the instruction manual.
* Please be careful of counterfeit products of our products. We are not responsible for any defects, accidents, or damages caused by the use of counterfeit products.

>> Rules/Designations/Certified Parts List (TOYOTA GAZOO Racing GR86/BRZ Cup page)

When purchasing

When purchasing, please check the compatibility information of the product in the flowchart below.

Related Items